Stepguard flooring: 十月 2019

2019年10月31日星期四

Stepguard flooring Halloween 2019

Treat or Trick?
Stepguard flooring
㊗
Halloween Pumpkin Carnival Festival
❤
❤❤
❤❤❤
❤️❤️❤️❤️
❤️❤️❤️
❤❤
❤

How to install Stepguard flooring

Thank you for choosing StepGuard Flooring,Please read this manual carefully and strictly follow the instructions before installation. StepGuard Warranty policy and services excludes any damages resulting caused by inappropriate installation procedures.

Required tools

Spacers Rubber Mallet Ruler Pencil Tape Measure Utility Knife

Before Installation

Floor inspection

Make sure there is no damage before installation

Loss reserved

Calculate the floor demand according to the building pavement area, and reserve 10-15% of the floor for cutting loss.

Environmental adaptation

It needs to be placed in the installation space one day in advance to adapt to the new environment. The temperature is controlled between 18-29℃ degrees . Take care to avoid direct sunlight and large temperature changes, and let the floor slowly adapt to the local temperature and humidity.

Level measurement

Clean and dust the ground, make sure there is no debris on the ground, and check whether the ground is clean and flat. The height difference of the ground should be less than 3mm within 2 meters (recommended ≤ 2mm)

Environment Prohibition

Can not be used directly as a moisture barrier. This product must not be installed in saunas, outdoors, or areas that have been soaked for long periods of time.

Gap reserved

Make sure to leave a gap of 5-8 mm between the wall and the fixtures (such as pipes and pillars, stairs, etc.). These gaps will be covered with decorative lines after the installation.

Tip: drill a hole 20 mm larger than the pipe diameter

Direction Determination

Determine the installation direction of the floor, and install the length of the floor parallel to the direction in which the sunshine comes

In Installation

1、 Inspect the floor, place the side with the raft on the wall, and leave a 5-8mm expansion joint between the floor and the wall.stepping forbidden within 24 hours after the installation completed , and the wooden wedge cant taken out till 24 hours later.

2、 The first piece floor of the second row, install on the long side, insert the raft of the floor into the groove of the first row of floors and lifts the floor slightly upwards at an angle of 30 degrees until the joint position flattens the floor to make it tightly joined. .

3、 The floor to be laid should be wedged into the correct position as described above.

4、 When weaving in the longitudinal direction, the distance between the front part of the panel and the front should be as small as possible. Then use the slab to tap the short side horizontally to make them join together. The specially designed lock will automatically buckle.

After Installation

Please maintain a suitable indoor temperature after installation. Excessive or too low indoor temperatures can cause the product to expand or shrink, which may affect the floor quality or User Experience.

Call Stepguard flooring for a Yue installation service 400 629 9929

2019年10月30日星期三

Why Stepguard flooring

The characteristics of the stone crystal
:

(1) 、The whole can be washed, 100% , suitable for use in any area except the ;
(2) 、 High environmental protection, E0 , ; (3) 、 class Bf1; for the highest level of floor, suitable for occasions with high fire protection requirements; (4) 、 High wear resistance;

(5) 、 , , and ; (6) 、The foot feels comfortable and good effect; (7) 、Simple and convenient ; (8) 、True , and adjust the different colors as needed; (9) 、It is resistant to cold and heat and does not deform. The is suitable for indoor space from (-20 ° C) to (60 ° C).

www.stepguard-usa.com

sales@stepguard-usa.com

VIP Hotline: 400 629 9929

2019年10月28日星期一

Stepguard flooring QuietTek collection show

Engineered Wood veneer Stone Crystal Flooring

Engineered Wood veneer Stone Crystal Flooring is a innovation new Flooring.Its structure is multiple of UV coating, wood veneer and StepGuard Diamond rigid core, formed by cold pressing.

Wood Veneer texture showed to be various with European,oak, walnut and birch etc.

Engineered Wood veneer Stone Crystal Flooring,inheriting the classic beauty of real wood and preserving the natural wood flooring texture, make your home fresh and more natural

ADVANTAGES OF THE stepguard FLOORING

· Natural Wood Veneer

· 100% Waterproof

· 0 Formaldehyde

· Unique Yue patented surface technology

· Fast and easy DIY installation

· A product ready for use immediately after installation

· Possible to renovate

Natural Wood Veneer

The StepGuard wood veneer flooring is a natural and noble product created from genuine wood. Wooden floors are healthier and more durable than any kind of synthetic imitation,they are pleasantly warm to the touch, they do not electrify nor attract dust or mites,Moreover,they provide perfect soundproofing of the enjoying of quiet and comfort.

100% Waterproof

The StepGuard wood veneer flooring with solid diamond core and doubel UV coating ,thus,it performs excellently with water,and mildew will not happen with high humidity.

0 0 Formaldehyde

StepGuard wood veneer flooring brings consumers a super natural and healthy floor that no any harmful materia such as benzene,formaldehyde and heavy metal

Unique Yue patented surface technology

Life has thousands of faces,STEPGUARD also has its pieces of faces

STEPGUARD Yue patented surface technology,leading you to a life excellently

Mark free,Stain against ,Anti Cigarette burning ,Fire Retardant ,Castor bearing ,Scratch resistance Impact resistance ,Anti Bacteria R10 Anti Slip,and high temperature resistance

Fast and easy DIY installation

The Stepguard wood floors can be installed in a floating system, that is glueless and based on modern tongue-and-groove joints. It is a quick and simple method, that allows you to install the floor yourself, without having to employ an expert. The floor is also easy to be dismantled or re-installed.And the floor is ready for use immediately after installation